Corrosion is destructive chemical or electrochemical reaction of materials with its environment, resulting surface deterioration or a breakdown in properties. Salt spray test is an accelerated corrosion test that produces a corrosive attack to the specimens of metals and coated metals in order to predict its suitability in use as a protective finish.
Corrosion Testing is used primarily to determine the corrosion resistance of painted or coated metal samples. A 5% salt water solution in a pH range of 6.5 –7.2 is atomized as a fog into the heated chamber maintained at 95℉±3℉(35℃±2℃). Test time ranges from 24 to thousands of hours,usually in 24 hour increments.Our salt spray test chamber can provide exposurt to a salt intensive stmosphere at designated temperature and testing period matching the proper specification.
Reference standard:
GB/T 2423.17: GB/T 10125; GB.T 2423.18; ISO 9227; IEC 60068-2-52; IEC 60068-2-11; ASTM B 117; ASTM B 368; MIL-STD-202; EIA-364-26
(1) Neutral salt spray(NSS)
Solution: 5% NaCl
PH: 6.5~7.2
Chamber temperature: 35℃
Salt settlement: 1~2ml/80cm2/h
(2) Acetic acid salt spray(AASS)
Solution: 5% NaCl with acetic acid
PH: 3.1~3.3
Chamber temperature: 35℃
Salt settlement:1~2ml/80cm2/h
(3)copper-accelerated acid salt spray(CASS)
Solution: 5% NaCl with acetic acid
CuCl2?H2O: 0.26g/l?.02g/l
PH: 3.1~3.3
Chamber temperature: 50℃
Salt settlement:1~2ml/80cm2/h
(4) Salt mist, cyclicSalt mist
Solution: 5% NaCl
PH: 6.5~7.2
Chamber temperature: 35℃
Salt settlement: 1~2ml/80cm2/h
Temperature & Humidity:
Temperature: 40℃
Humidity: 93%( 2%/-3%)
Restricted Substances Testing
Salt Fog Testing
- Previous:BPA Testing
- Next:Organotin Testing
Restricted Substances Testing
- Total Lead Testing
- Total Cadmium Testing
- Chrome VI Testing
- Nickel Release Testing
- EN71-3 Testing
- Heavy Metals Testing
- Phthalates Testing
- PAHs Testing
- Formaldehyde Testing
- AZO dyes Testing
- BPA Testing
- Organotin Testing
- Allergenic Dyes Testing
- Carcinogenic Dyes
- PFOS & PFOA Testing
- SCCP & MCCP Testing
- PCBs Testing
- Halogen Testing
- APEO & NPEO Testing
- PCP Testing
- DMFu & DMFa Testing
- OPP Testing
- Pesticide Testing
- Flame Retardants
- MSDS report making
- ELV Testing
- Metal Analysis
- Salt Fog Testing
- Metals Analysis
- Formulation Analysis
- Materials Analysis
- Failure Analysis
- Reliability Testing
- TGA Analysis
- Nondestructive Test
- SEM EDS Analysis
- Polymer Analysis
- Rubber Analysis